Tips
How to Use Your Our Blender
Our Blenders comes partially charged at purchase, so you can give the blender a quick clean before plugging in for a full charge.
Always start by adding a liquid (like water, milk, or juice). This will make blending easy.
After you’ve added your liquid, toss in the rest of your smoothie ingredients (or ingredients for whatever you are making) and blend!
For maximum power, you can start the Blender upside down and allow the blades to get up to their full RPMs before blending.
Cutting your fruit or other smoothie ingredients into small chunks will allow for the smoothest possible blend.
Start with plenty of liquid, add ice, and blend!
Our Blender features a built-in strainer to help keep your beverages, and other concoctions, chunk-free.
Never overload your Blender with ingredients. Leave a little room at the top.
We do not recommend putting hot liquids that are over 120° F / 49°C into the Blender, as this may cause damage, including leaks, to the jar and base.
Do not run the Blender when the jar is empty to avoid burning out the motor.
Never put your hands inside the Blender or touch the blades with your fingers.
The built-in safety feature prevents the blades from spinning when the jar is detached
Cleaning is easy. Just add a drop of soap, water, blend, and rinse.
Deep clean the Blender periodically. The lid and strainer can be separated, and the jar can be removed from the base. There are silicone o-rings in the lid, jar, and base. The o-rings should be removed for a more thorough clean and left out long enough for each part to fully air dry. Be careful to avoid getting water in the charging port.
Remove and separate the lid and strainer to let the Blender air dry after cleaning.
If the blades are jammed, simply flip the blender upside down, give it a quick shake and turn it on. Then, turn it right-side up so that your ingredients hit all 6 blades at full speed.
If the Blender is jammed and the Regular Jam solution doesn’t fix it, flip it upside down and twist off the base to remove whatever has blocked the blades. Then, twist the base back on, align the base correctly, and start blending.
Red and blue flashing lights mean the jar is not aligned with the base. To fix this, screw the jar clockwise into the base until the arrow on the jar lines up with the arrow on the base. As a safety precaution, there are magnets on the jar, which must be aligned, or the blades won’t spin.
The light turns red when the Blender needs to be charged. Charge the blender with any USB port, and the light will turn blue once it is fully charged.
As a safety precaution, there are magnets in the jar and base of the Realblend247, which must be aligned, or the blades won’t spin. Make sure the arrow on the front of the jar is aligned with the arrow on the front of the base.